UV Chemistry PRODUCTS List:

I. ChemGard 100 series: Air Gas Bottle / Pressure Vessel coatings

CG 100’s - Gel Coats – Beautiful, tough, protective coatings for composite surfaces.

CG 120’s - Aluminum Liner Coatings – Interior & Exterior protective and dielectric, barrier coatings

CG 130’s - Thixotropic, Levelling / Surface Repair coating

CG 150’s - Fiber Impregnation Coating - For fiber glass


II. ChemGard 500 series: Specialty Coatings and Adhesives

Pigmented Coatings – Colors of the rainbow for Floors / Bottles & Others

CG 500 - Glass Primer

CG 501 - Glass Top Coats

CG 502 - Aluminum protective coatings

CG 503 - Clear Metal Coating

CG 504 - Ceramic coatings

CG 505 - Casting resins

CG 511 - Overprint resins

CG 513 - Low out-gassing potting compounds

CG 514 - Medical grade adhesives

CG 516 - Maskants – Chemically resistant protective “stick and release” coatings

CG 517 - Optical hard coating

CG 550’s - Pigmented Coatings – Colors of the rainbow for floors / bottles & other applications

III. ChemGard 2000 series: Floor Coatings

CG 2000 C&C - Thixotropic, substrate repair and filler coating

CG 2000 VR+ - Low viscosity sealer coating

CG 2010 - Beautiful, super durable sealer coating for concrete / tile / stone / VCT / wood

CG 2000 VR – Viscosity reducer , thinner for CG 2010

CG 2011 S1-3 - Beautiful, Satin finish sealer coating for concrete / tile / stone / VCT & wood

CG 2030 M - Beautiful Matte finish sealer coating for wood surfaces

_________________ DETAILED INFORMATION ___________________

I. ChemGard 100 series: UV Curable Air Gas / Pressure Vessel Coatings


1. CG 100 Gel Coat - Tough, Beautiful Over-Coating for air gas bottles – Protective Final Coating Formulated for Application Over Fiber Glass and Carbon Fiber wound bottles.

o Coatings cure in seconds with UV lamp system
o Exceptional adhesion to fiber glass
o High impact and abrasion resistance
o Great chemical and vapor resistance
o Re-coatable with great adhesion to itself
o 100% solids
o zero VOCs - Zero solvents
o Non-flammable – No Known Ccarcinogens
o Ships w/o restriction (like water)
o Available in the colors of the rainbow and metal fleck
o Unlimited shelf life
o Apply via spray, brush or dip coater


2. CG 120 Dielectric, Barrier Coatings formulated for application on the Interior and/or Exterior surfaces of aluminum parts, particularly bottle liners.

o Cures in seconds
o Exceptional adhesion to aluminum
o High Dielectric, Insulating Properties
o Fills micro cracks - enhance cycle strength, reduce porosity
o Recoat-able – great adhesion to itself
o OD coating - apply via spray, brush or dip coater
o ID coating – Apply via specially designed “rotate / index” mechanism
o Easy Clean with acetone or alcohol
o Formulated of 100% solids
o Zero VOCs
o Zero solvents
o Non flammable
o No Known Carcinogens
o Ships w/o restriction (like water)
o High chemical and impact resistance
o Available in colors
o Unlimited shelf life


3. CG 130 - Thixotorphic, “Filler” Coating designed for repairing and leveling of Fiber Glass, Carbon Fiber and other uneven substrates.

o Cures to 1” thickness in seconds
o Hard surface – Minimal Shrinkage
o Consistency of Vaseline – Apply with squeegee
o Sand immediately after cure

4. CG 150 Fiberglass and Carbon Fiber Winding Resins formulated to facilitate in-place, on-the-winder curing of fiber glass and carbon fiber

o Instant, tack free, surface cure
o Fast Secondary, Full Depth Cure in Minutes

(Exothermic heat generated from the photo chemical reaction of the uv surface curing process triggers a secondary cure mechanism which facilitates a complete cure to the core of the substrate)

o Locks fiber structure in place by layer - allows higher winding tension
o Eliminate Micro Wrinkling – higher modulous.
o Eliminate ovens, material waste and sanding
o Reduced resin content – Increase strength
o Recoat-able – great adhesion to itself
o Apply via conventional winding equipment
o Easy clean with acetone or alcohol
o High chemical and impact resistance


II. ChemGard 500 series - UV Specialty Coatings

1. CG 500 - Glass Primer

2. CG 501 - Glass Top Coats

3. CG 502 - Aluminum protective coatings

4. CG 503 - Clear Metal Coatings

5. CG 504 - Ceramic coatings

6. CG 505 - Casting liquids

7. CG 509 – Epoxy composite filler

8. CG 511 – Overprint topcoat

9. CG 513 - Low out-gassing potting compounds

10. CG 514 - Medical grade adhesives

11. CG 516 - Maskants – Chemically resistant protective “stick and release” coatings

12. CG 517 - Optical hard coating

13. CG 550’s - Pigmented Coatings – Colors of the rainbow for floors, bottles, composites & other applications

III. ChemGard 2000 series – UV Curable Floor Coatings


1. CG 2000 C&C “Crack & Cover” UV curable, thixotrophic, filler paste designed for repairing substrate defects and building corner coving.

o Apply with trowel or putty knife
o Cure in seconds with UV lamp
o Cures hard with minimal shrinkage
o Sand immediately after cure
o Adheres well to concrete, stone, tile and other architectural substrates
o Over Coat immediately after cure
o Compatible with all UVC ChemGard 2000 flooring products

2. CG 2000 VR – Viscosity reducer designed as a thinner for CG 2010

o Add to CG 2010 up to 30% - mix well and apply to desired viscosity

3. Cg 2000 VR+ - Low viscosity sealer coating ideal for concrete and wood

o Ideal under-coat for CG 2010 top coat
o Apply via roller, spray, squeegee or a lent free, micro fiber cloth
o Apply at less than 1 mil thickness
o Adheres well to concrete and wood surfaces – CG 2010 adheres well to VR+
o Good abrasion resistance
o Average stain resistance.

4. CG 2010 - Beautiful, super durable sealer coating for concrete, tile, stone, VCT & wood

o Cures in seconds
o Excellent adhesion to concrete, vinyl commercial tile, wood & stone
o Excellent adhesion to CG 2000 VR+
o Clear, non-yellowing, beautiful top coat
o Apply via roller, spray or brush
o Apply to 3 mils thickness
o 100% solids
o Zero VOCs
o No solvents, flammables or known carcinogens
o “On Demand” curing – cures ONLY when exposed to uv light
o Ships w/o restriction (like water)
o High chemical, abrasion and impact resistance
o Available in the colors & non-skid
o Available in Hi-gloss, Satin & Matte finish

5. CG 2011 S1-3 Beautiful, satin finish sealer coating for concrete, tile, stone, VCT & wood surfaces

o Has all the attributes of CG 2010 above.
o Can be ordered in various, reduced gloss levels

6. CG 2030 M - Beautiful Matte finish sealer coating for wood surfaces

o Has all the attributes of CG 2010 above.
o Can be ordered in various, reduced gloss levels

Print This Page